EDP-C2

FULLY ELECTRONIC ELECTROMAGNET CONTROLLER FOR EXCAVATOR (MOBILE CRANE).

Avantages

The EDP-C2 excavator electromagnet controller is fully electronic. In addition to having an increased lifespan, it allows you to enjoy several benefits, such as;

  • Reduce maintenance cost
  • Increased generator and electromagnet life
  • Fast sorting
  • More efficient – increases lifting capacity
  • Easy installation
  • Easy to use
  • Runs up to 33 kilowatts, so no complex choices to make
  • If something goes wrong, a message appears on the controller’s screen

THE EDP-C2 IS THE SMALLEST AND EASIEST INSTALLATION ELECTROMAGNET CONTROLLER IN ITS CLASS.

TECHNICAL SPECIFICATIONS

Here is the detail of the technical specifications of the EDP-C2 magnet controller for excavator.

  • Designed for electromagnets powered by a DC generator.
  • Sizes 14 inches tall, 14 inches wide and 4 inches deep with a weight of 32 pounds.
  • Powered with 12 to 24 volts.
  • Can control generators up to 33 kw.
  • Operating temperature is -50 degrees Celsius to 60 degrees Celsius.

SECURITY

Safety should never be a parameter to be overlooked. EDP-C2 excavator electromagnet controller was designed to increase safety of use.

  • No arc is produced unless the electromagnet is disconnected.
  • If the electromagnet is disconnected, the voltage drops at least from the generator, from 0 to 20 vdc, in less than half a second.
  • Only 24 vdc manual control, instead of 220 vdc and more.

MAINTENANCE

The use of electronics does not require any maintenance. Our EDP-C2 electromagnet controller avoids production loss and offers lower operating costs. No mechanical parts make up the controller. When common problems are detected by the controller, these are buffered in memory. All controller inputs and exits are displayed at all times and in real time. Positive and negative tensions and amperages are identified by capital letter and lower case letter.

With this data, it’s possible to solve most problems online, so you don’t have to wait for a technician to be available.

INSTALLATION

The EDP-C2 controller is very easy to install, requiring only a few wires to be plugged in.

You don’t want to install it yourself: EDP Conception can offer you installers.

SETTING

Example of keyboard-adjustable settings to increase performance:

  • Magnet volt
  • And many other…

The EDP-C2 is initially configured with basic settings that are virtually universal.

HYDRAULIC SYSTEM

  • DC hydraulic system available from 5 to 33 KW.
  • Hydraulic part available for magnet system.

Contact us for more information.